The
Magna-Pop pop-up
This
Canadian Pop-up Display has some really nice features.
1. There is no black plastic showing at the top or bottom of the panels.
2. When the frame pops open magnetics hold it upright. Nothing to hook.
3. The channel bars attach to the frame with magnetics. The panels mount
magnetic to magnetic for more strength than magnetic to metal and this
acts like a self aligning system for the panels.
4. The 1/2" round aluminum tubing frame bars attach to the hubs with
Phillips head bolts for easy field repair.
5. Lights mount above any of the panels. Add more anytime.
This is one of the simplest setups around!
The Magna-Pop uses Premier
fabric:
Print this for future reference.
This setup is simple with the turquoise magnetic connectors that hold
the frame open. The magnetic channel bars (see below) have their own
zippered bag.
 
 1.
Open up the frame and the 3
Turquoise magnetics hold the frame
open. NOTE: in the photos below the strong, 1/2" round tubes are
attached with Phillips bolts for easy repair. Many popup require you to
send the frame to the factory. Many also require drilling out pop-rivets
for so-called field repairs.
2.
Put the channel
bars in place on the frame. Magnets on the ends of the bars snap to
magnetics in the hubs. There are 3 bars that go onto the back, ends of
the frame for the curved endcaps to connect to. The bars then form a
vertical column of strength from floor to the top.
  3.
Lay the wheeled
case on its side and pull out the panels. Hang the panels. I have a TIP
SHEET for setup and packing that gives information the manufacturers
don't. The lights are in the lid of the case. Each of the front panels
are: 27 7/16"Wx 87 3/4"H. Replacement panels are $102. per.
 
4.
Place the light
on the top X frame bars as shown and slowly lower into place. 200W or
150W lights are available.
 5.
Podium Kit: Wrap
the fabric around the wheeled case and attach to the velcro on the back
side. Standard is the plastic top that sets into the top of the case.
The beautiful, solid, hinged wood top is optional for $50. Its fits into
the same case. Case: 18"x 27"x
37". The wood top is 30"x 18.25".
|
